The positive yarn feeder is with voltage 42V, it is also called mechanical intermittent storage feeder
for flat knit machine. It consists of a storage cylinder with a 42V motor inside. The cylinder is turned by the motor to wind the yarn. The motor is controlled by a mechanical switch on the top cover. The storage cylinder stops turning immediately after power cut off. It’s used to adjust and stabilize yarn feeding tension. It consists of a storage cylinder with a micro motor inside. The storage cylinder turns under the drive of the micro motor. The topline layer of the yarn is wound and the motor is switched by the inclined ring on the storage cylinder. When the yarn layer is reduced, the inclined ring is lowered, the switch is switched on, and the motor drives the yarn storage cylinder to rotate and wind the yarn; When the yarn reaches a certain amount, the skew ring is lifted, the switch is disconnected, and the yarn storage cylinder is stopped, so that a certain amount of yarn layer is always maintained on the yarn storage cylinder, so as to ensure that the whole valve of yarn unwinding condition is consistent, the yarn feeding tension is even, and the yarn feeding is stable.